Solar planned around the plant meter, the shift pattern, and the usable roof or land.
Paso Solar supports the heavy-engineering, foundry, and chemical units in the Jigani KIADB industrial area near the Bommasandra-Jigani Link Road, where furnaces, compressors, and process equipment carry a large and steady daytime draw.
A system designed for this plant, this connection, this shift pattern, and this building.
We study the demand profile and power factor closely, because on a power-heavy HT connection the demand charge and PF penalty can be as large as the energy saving, and we confirm every input from the BESCOM bill.
Roof space, adjacent open land, crane paths, and hot-work zones are assessed together so rooftop and ground-mount can be combined where it helps, and we check the sheeting for heat and fume exposure near the melting bay.
Hot-work permits, furnace schedules, and crane movements are built into the installation plan from the start, and we run the BESCOM net-metering process alongside the build.
Your proposal
It sets out the savings basis across energy and demand charges, the GNM review where relevant, who is responsible for what, DISCOM support, depreciation inputs, and the service cover for the proposed system.
Often yes, because the daytime load is high and steady, which is exactly what solar serves well. We show the split between energy saving, demand-charge reduction, and power-factor improvement so you can judge it on your own numbers rather than a general claim.
No. The usable area limits the layout, while the target connection, representative bills, recorded demand, shift pattern, and current approval conditions determine a responsible capacity.
It can, where the system generates through the hours your plant records its peak. The estimate shows the demand-charge reduction separately from the energy saving, because the two do not always move together.
The drawings, test and commissioning records, structural sign-off, monitoring access, operating guidance, warranty information, and the agreed support or AMC process.
Share recent bills, sanctioned demand, shift pattern, and basic site information.